ALRAD ELECTRONICS
PRODUCTS
ANALYTICAL SYSTEMS
DENSITOMETERS
ELECTRON MULTIPLIERS
HIGH VOLTAGE
INFRA RED DETECTORS
LASER DIODE MODULES
LASER GOGGLES
LASER PRODUCTS
LASER PROJECTORS
NUCLEAR PRODUCTS
OPTOELECTRONIC SOCKETS
PHOTODETECTORS

2D/3D Laser Projection systems

LASER PROJECTION OF OUTLINES, TEMPLATES,PATTERNS.

Laser projectors display precise outlines, templates, patterns or other shapes on virtually all surfaces by projecting laser lines.

The laser projection is based on CAD data. Because of thedifferent requirements, LAP makes a difference between projectors and software for 2D applications (projection on flat surfaces) and 3D applications (projection oncurved surfaces).

Measurement equipment or physical templates are substituted by a 1:1 outline, displayed by a bright laser line. Manual alignment is easier and faster, errors during parts placement are reduced.
Changes in design can be easily implemented, as no new physical template has to be produced, no complicated measurement description has to be rewritten - changing the projection data is sufficient.

You may

- join parts
- place layers of material
- align parts
- display work steps
- control completeness
- or support any other work by giving visual aids:

laser projectors reduce time to production, improve output capacity and reduce rejects.

More information on LAP Laser 2D/3D projection systems

---

 

 

The Z-LASER laser projection systems offer a host of benefits in the woodworking industry. They are used extensively for applications such as truss construction where the laser marks the nailboard positions accurately and in wooden frame building construction where the laser projectors can illuminate 3D construction profiles..

Data sheets (pdf files) on the systems can be downloaded here:-

---

LP HFD laser projector

Data sheet LP HFD

• Flicker free projection at full fan angle (80°x80°) due to high projection frequency (50 Hz)
• At smaller angles projection frequencies up to 90 Hz can be achieved
• Optimised for projection on 3-dimensional surfaces
• High projection accuracy: Better than 0.5 mm per meter projection distance
• Low unsteadiness (demonstration speed until 90Hz)
• For very large and very complex projections up to 16 projectors can share overall picture
• optional: active air cooling 

---

LP CUBE laser projector

Data sheet LP-CUBE

• Especially for the projection of simple contours (21 lines or 5 objects) 
• Red laser source
• Upgradable to full projector
• Fan angle up to 80° by 80°
• serial or Ethernet data transfer
• Air cooled housing
• Optional: Active air cooling
  

See our application note on the use of laser systems in the wood industry or call us on 01635 30345 for more information on these systems

 

Register	Technical Support	Contact Us	Exhibitions	About Alrad	Site Map